|
| |
CPU |
| |
| |
Supports 64-bit AMDฎ Phenom FX / Phenom processor (Socket AM2+) |
| |
Supports Phenom FX CPU: FX-82 |
| |
Supports Phenom CPU: 9700, 9600, 9500 & 8000 Series |
| |
Supports 64-bit AMDฎ Athlon 64FX / Athlon 64 X2 / Athlon 64 processor (Socket AM2) |
| |
Supports Athlon 64 CPU: 3500+, 3800+ |
| |
Supports Athlon 64FX CPU: FX-62 |
| |
Supports Athlon 64 X2 CPU: 3800+, 4000+, 4200, 4400+, 4600+, 4800+, 5000+, 5200+, 5400+, 6000+, 6400+ |
|
| |
|
| Chipset |
| |
| AMD 790FX (AMD RD790) Chipset |
| - |
HyperTransport connection to AMD Phenom/Athlon processor |
| - |
HyperTransport supporting speed up to 2.6GHz (5200mt/s) |
| - |
Supports 4 PCI-E x 16, & 1 PCI-E X 1 |
| |
|
| ATI SB600 Chipset |
| - |
Supports SATAII controllers for four drives |
| - |
Supports single channel Ultra DMA 66/100/133 master mode EIDE controller |
| - |
ACPI & PC2001 compliant enhanced power managment |
| - |
Supports Hi-Speed (USB2.0) controller 480 mbsec transfer rate up to 10 ports |
|
| |
|
| Main Memory |
| |
| |
Supports 4 240-pin DDR2 SDRAMs up to 8GB memory size |
| |
Supports Dual Channel DDR2 800/1066 DDR2 SDRAM |
| |
Supports 1.8v DDR2 SDRAM DIMM |
Due
to the High Performance Memory design, motherboards or system
configurations may or may not operate smoothly at the JEDEC (Joint
Electron Device Engineering Council) standard settings (BIOS Default on
the motherboard) such as DDR2 voltage, memory speeds and memory timing.
Please confirm and adjust your memory setting in the BIOS accordingly
for better system stability.
Example: Kingston HyperX DDR2-800 PC-6400 operates at 2.0V, 4-4-4-12.
For more information about specification of high performance memory
modules, please check with your Memory Manufactures for more details. |
|
| |
|
| Slots |
| |
| |
Four PCI Express X16 slots , support ATI CrossFire Technology (PCI Express Bus Specification v2.0 compliant)
{Slot configurations: Dual CrossFire (16X+16X), Triple CrossFire (16X+8X+8X), Quad CrossFire (8X+8X+8X+8X)} |
| |
One PCI Express X1 slot |
| |
Two 32-bit PCI slots (3.3v/5v PCI Bus Master slots) |
|
| |
|
| On-Board IDE/SATA |
| |
| |
An
IDE controller on the ATI SB600 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA133/100/66 operation modes. |
| - |
Can connect up to 2 IDE devices |
| |
SB600 supports 4 SATA II ports (SATA1-4). Transfer rate is up to 300MB/s. |
| - |
Supports up to 4 SATA |
| - |
RAID 0 or 1, 0+1 is supported |
| - |
RAID function` work w/ SATA/SATAII HDDs |
| |
Promise T3 controller supports 2 SATAII (SATA5/6)(SAS ready) & 2eSATA ports |
| - |
RAID 0, 1, or 0+1 is supported |
| - |
RAID function work with SATA/eSATA HDDs |
|
| |
|
| BIOS |
| |
| |
The
mainboard BIOS provides "Plug & Play" BIOS which detects the
peripheral devices and expansion cards of the board automatically. |
| |
The mainboard provides a Desktop Management Interface (DMI) function which records your mainboard specifications. |
| |
Supports boot from LAN, USB Device 1.1 & 2.0 and SATA HDD |
|
| |
|
| Audio |
| |
| |
8 Channel software audio codec Realtek ALC888 |
| |
Compliance with Azalia v1.0 spec. |
| |
Flexible 8-channel audio with jack sensing |
|
| |
|
| LAN |
| |
| |
Realtekฎ 8111B LAN chip |
| - |
Supports 10Mb/s, 100Mb/s and 1000Mb/s |
| - |
Compliance with PCI-Express v1.0a |
|
| |
|
| IEEE1394 |
| |
| |
VIA VT6308P controller |
| |
Support up to 2 IEEE 1394 ports (rear x 1 / front x 1) |
| |
Transfer rate up to 400 mbps. |
|
| |
|
| On-Board Peripherals |
| |
| - |
1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes |
| - |
1 serial port (supported by pin-out) |
| - |
1 audio jack (5-in-1), coaxial/fibre SPDIF out |
| - |
10 USB 2.0 ports (Rear x 4 / Front x 6) |
| - |
1 RJ45 LAN jack |
| - |
2 eSATA ports |
| - |
2 IEEE 1394 a connectors (Rear x 1/ Front x 1) |
| - |
1 CD-in pinheader |
|
| |
|
| Dimension |
| |
12 in (L) x 9.75 in(W) ATX Form Factor |
| |
|
| Mounting |
| |
9 mounting holes |
| |
|
|
