ADAPTEC ARO-1130U2 Zero Channel SCSI RAID Adapter Card

Home > Controller Cards >

ADAPTEC ARO-1130U2 Zero Channel SCSI RAID Adapter Card - Retail

Our Price: $199.00

Availability: Usually Ships in 24 to 48 Hours
Product Code: CRD-ADAPTEC-1130US

Description

This Zero Channel SCSI RAID adapter adds RAID functionality to Adaptec SCSI chips on the motherboard when inserted into a RAIDport III compliant slot. Targeted for entry-level servers, it provides up to 80 MB per second for each channel. Up to 15 SCSI devices may be connected. RAID levels 0, 1, 0/1, 5 are supported, and the standard 2 MB cache memory module is upgradable to 64 MB

Features

1 x Adaptec ARO-1130U2 SCSI RAID adapter
Ideal for users who need an inexpensive hardware RAID solution
System Environment: Entry-level servers
Data Transfer Rate: Up to 80 MBytes/sec per channel
Bus Type: 32-bit PCI
System Requirements: PC Workstation featuring a PCI-RAIDport III slot
One or more SCSI disk drives attached to the motherboard (AIC-7896)
Cache Memory: Up to 64 MBytes EDO DIMM
Device Protocol: SCSI Ultra2, Ultra, Fast and Wide
RAID Support: RAID 0, 1, 5, and 0/1
Advanced Storage Management Features
RAID co-processor
Hot spare (pool and dedicated)
Hot swap of drives
Array configuration on disk
SAF-TE support
User-defined rebuild priority
User-defined verify priority
Bootable array support
Hot-spare testing
Scheduler for rebuild, verify, and hot-spare testing
Array status monitoring and event notification
User-selectable broadcast and monitoring
Adjustable stripe width
Advanced Hardware Features
60 NS EDO DIMM memory
Flash upgradable firmware and BIOS
SCSI Channels:Ultra2 SCSI chip connected to RAIDport III
Board Dimensions: Half-size PCI card (6.875 x 4.2 inches, 17.463 x 10.668 cm)
Power Consumption: 5V +/- 5%
Operating Characteristics: 41 F to 131 F(5 C to 55 C) 20% to 90%, non-condensing
Storage Characteristics: -67 F to 203 F(-55 C to 95 C)